IT WAS QUANTUM LEAPS AHEAD OF ITS TIME
IN 1984. NOW THE MICROPACER RETURNS WITH
IT’S MICRO CHIP COMPUTER THAT DISPLAYS
TIME, DISTANCE AND PACE.
CHECK OUT HOW IT WORKS.
1.THE PEDOMETER MEASURES RUNNING DISTANCE UP TO
99.999K
2.DISPLAYS DATES FROM 1.1.09 THROUGH 12.31.30
3.FUNCTIONS AS A 24 HOUR CLOCK
4.FUNCTIONS AS A STOPWATCH TIMER WITH SECONDS, UP TO
999 MINUTES AND 59 SECONDS
SETTING THE TIME:
TO SET TIME, PRESS THE RESET BUTTON WHILE IN CLOCK MODE.
PRESS THE MODE BUTTON TO ADJUST HOUR DISPLAY. PRESS
RESET TO ADJUST TO MINUTE SETTING. PRESS MODE TO ADJUST
MINUTE PRESS MODE TO RETURN TO CLOCK MODE.
* IF NO BUTTON IS PRESSED FOR THREE SECONDS, THE DISPLAY
DEFAULTS TO CLOCK MODE.
SETTING THE DATE:
PRESS MODE TO ENTER DATE MODE. PRESS RESET TO ADJUST
YEAR. PRESS MODE TO ADJUST DISPLAY TO CORRECT YEAR.
PRESS RESET TO ADJUST MONTH MODE. PRESS MODE TO SET
THE CORRECT MONTH. PRESS RESET TO PROMPT THE ADJUST
DAY MODE
* IF NO BUTTON IS PRESSED FOR THREE SECONDS, THE DISPLAY
DEFAULTS TO DATE MODE.
SETTING STRIDE DISPLAY:
PRESS MODE TO ENTER DISTANCE MODE. PRESS RESET TO ENTER
ADJUST STRIDE MODE. PRESS MODE TO SET STRIDE DISPLAY.
PRESS RESET TO TOGGLE BACK TO DISTANCE MODE,
* IF NO BUTTON IS PRESSED FOR THREE SECONDS, THE DISPLAY
DEFAULTS TO DISTANCE MODE,
RESETTING DISTANCE DISPLAY:
IN DISTANCE MODE, PRESS MODE AND RESET TOGETHER 10
RESET THE DISTANCE VALUE DISPLAY. TO ACTIVATE PEDOMETER,
PRESS RESET
USING STOP WATCH TIMER:
IN STOPWATCH MODE PRESS MODE AND Res
SET TOGETHER TO
RESET THE COUNTING VALUE. PRESS RESET TO START COUNTING
DISPLAY. PRESS RESET DURING COUNTING TO Stop PRESS
ONCE AGAIN TO RESUME COUNTING. PRESS MODE TO RESET
THE COUNTING DISPLAY
THE FINE PRINT:
EACH PEDOMETER / MICRO COMPUTER CONTAINS A SENSITIVE
VIBRATION SENSOR. AVOID RECKLESS CONTACT WITH HARD
SURFACES. PEDOMETER / MICRO COMPUTER DATA MAY RESET
UPON HEAVY CONTACT.
IF RESET OCCURS, INITIAL INFORMATION MUST BE
RE-ENTERED. HEAVY CONTACT (FROM A HEIGHT OF SOCM OR
HIGHER) MAY RESULT IN DAMAGE TO THE VIBRATION SENSOR.
DO NOT STORE STORAGE IN TEMPERATURES BELOW OC (32F) OR
OVER 40C (104F). EXCESSIVE HUMIDITY OR WATER CONTACT MAY
DAMAGE PEDOMETER / MICRO COMPUTER. ELECTRO-MAGNETIC
SHOCK MAY DAMAGE PEDOMETER / MICRO COMPUTER.
PEDOMETER / MICRO COMPUTER IS DESIGNED FOR RUNNING
SPEED BETWEEN 120 -230 STEPS / MIN. UNUSUAL MOVEMENT
OR VIBRATION MAY AFFECT THE ACCURACY. REPLACE BATTERY
WHEN LCD DISPLAY BEGINS TO FADE. EXPECTED BATTERY LIFE IS 8 - 10 MONTHS. BATTERY TYPE: LR41 (OR EQUIVALENT).
